Skip to content

All That You Should Know Regarding Lubricants Used to Protect Wires

A rope is made up of continuous strands wrapped around a center core. Wire rope comes in a variety of forms and applications. The majority are steel wires wound together to create a strand.

The ropes (cables) category is divided into several sub-groups, including category seven and type 1 nylon rope, which differ only in the grade of steel used. The number of strands per strand is also an important distinction. Nylon 6/6 ropes feature three wires per strand, while nylon 6/10 ropes have four wires per strand.

A 6×19 designation indicates a strand and Wire combination. This refers to a rope with six strands and 19 wires in each strand. Strand sizes and configurations provide For a variety of rope flexibility and resistance to abrasion and compression. Small wires are more flexible when bent sharply over small sheaves (pulleys). When the cable is dragged or rubbed across abrasives, large outer wires are preferable.

There are three sorts of cores. An independent Wire core (IWRC) is a 6×7 Wire rope that has a 1×7 Wire strand core, making It a 7×7 Wire rope. Aramid ropes, which are used in most IWRCs, have a greater tensile and bending breaking strength than fiber core ropes and are resistant to compression and deformation.

Wire rope Lubrication

Regardless of the construction or composition, lubricating Wire ropes is a complex task. Fibre-core ropes are somewhat more straightforward to lube than steel-only ropes. As a result, it’s crucial to think about field relubrication when selecting rope.

Functions of rope Lubricants

  1. Used For reducing the friction that occurs when the wires move over each other.
  2. Prevent corrosion on the exterior surfaces of the wire.

Types Of Wire rope Lubricants

Penetrating lubrication

Penetrating lubricants are a type of lubricant sprayed on the Wire rope’s interior and evaporate, leaving behind a thick protective layer to lubricate and protect each strand.

  1. Coating lubrication

Heat and water-resistant wires are coated with a thin layer of lubricant that penetrates just enough to prevent moisture from getting inside and wear and fretting corrosion from contact with other objects.

Two types of Wire lubricants are employed. However, because most Wire fail from the inside, it’s critical to ensure that the core in the middle receives enough lubrication. A combination technique of saturating the core with a penetrating lubricant followed by a coating to seal and protect the outer surface is advised. Petrolatum, asphaltic, grease, petroleum oils, or vegetable oil-based Wire lubricants are among the most popular.

Petrolatum compounds, when combined with the appropriate additives, have excellent corrosion and water resistance. Furthermore, petrolatum materials are translucent, allowing the technician to perform visible inspections. At higher temperatures, petrolatum lubricants can drip off But nevertheless maintain their consistency well below freezing conditions.

The majority of asphaltic compounds dry to a very dark hardened surface that makes inspection difficult. They are resistant to long-term storage But become brittle in cold weather. (masto)

Wire lubricants for lopes come in a variety of forms. These are the film formulations that penetrate only partway But seldom reach the rope core. Sodium, lithium, lithium complex, and aluminium complex soaps are greases that can be used to thicken oil. Soft semifluid greases are typically used in this application. (https://masto.no/products/wire-rope-lubricator/) If used with pressure lubricants, they get coated and penetrate partially.

In a nutshell, vegetable oils and petrochemical oils are the most effective, with vegetable oil being the most penetrant of them all. Vegetable oil is also the simplest to apply because good additive engineering For these penetrating types provides them exceptional wear and corrosion resistance. Oil type lubricants’ fluid property aids in the cleaning of the rope by removing abrasive external debris